FOR EXTERIOR CLEANING:

Suggestion: When using outdoors, have a 5 gallon bucket ready to catch the dirty water flushed through the unit.

How To Use The Brush Wash

INSIDE VS OUTSIDE

OUTSIDE: Take the Brush Wash and hook up to hose at female hose connection. 

INSIDE: Simply hold the unit under the faucet to let the water run through it in an horizontal fashion.

DIRECTIONS

1. Place brush into unit.

2. Turn on water. Once the water begins circulating through the unit, ensure the pressure does not move the level of the water pass the intake (where the water enters the unit).

3. Begin to plunge the brush up and down inside the unit, allowing the water to rinse the paint from the brush. *NOTE - this will speed the cleaning process up.

4. After approximately 30 seconds of rinsing, remove the brush from the unit, and use the built-in brush comb on the back of the unit to remove any dried on paint. 

5. Then, place the paint brush back inside the unit for a final rinse.

6. You will know the brush is clean when the water circulated out of the unit is no longer dirty.

7. Repeat steps five and six until all hard-to-remove paint is gone.

8. Turn the water off, and let your paint brush dry appropriately.